Tried making a new account without any luck also. Brought it to best buy, and geek squad failed to figure it out. Is there anything else you can think of to fix this?

BTW.

When you downloaded and extracted zip file:
http://www.homedj.net/Download/4.1.6/homedj.zip

You do not have to run installer again.

Just unzip that file into, let's say, C:\HomeDJ folder.

Then from that folder start HomeDJ Configurator: Vorlan.HomeDJ.Configurator.exe
Start it as Administrator:
right mouse click on Vorlan.HomeDJ.Configurator.exe and from popup menu select Run as administrator.

Once Configurator is opened, complete the wizard.

Let me know if you were able to run Configurator that way.

Creation of a windows account not user sorry. Best buy had my laptop for 3 days, and couldn't figure it out either.

Program Compatibility
Issues found Incompatible Application Fix application Vorlan.HomeDJ.Configurator
Issues found
< Incompatible Application Vorlan.HomeDJ.Configurator is incompatible.
Fix application Vorlan.HomeDJ.Configurator Provides steps to fix the incompatible application.

CompatMode CompatMode

UserVerifySolution User Verification of Solution Verify_NO Detection details
Collection information Computer Name: WIN-4996JIU2BQH Windows Version: 6.1 Architecture: amd64 Time: Tuesday, May 20, 2014 8:19:17 PM Publisher details
Program Compatibility Make older programs run in this version of Windows. Package Version: 1.5 Publisher: Microsoft Windows
Program Compatibility Make older programs run in this version of Windows. Package Version: 1.0 Publisher: Microsoft Corporation

Ok.

Did you run HomeDJ on the same computer before?
Did you restore Operating System on the same hardware?

What worries me that the error message states that windows is working in amd64 mode:

Architecture: amd64

Do you have Windows SP1 installed?

Let's try the following:

First we will uninstall Microsoft .NET 4.0
1. Open Control Panel
2. Click Programs and Features
3. In the list find the following:



4. Uninstall both highlighted items

Next we will uninstall Microsoft .NET 3.5

5. While you are in the Programs and Features, click the link on the left as highlighted below:



6. It will show this window:



7. Uncheck highlighted item and click OK
8. Reboot your computer.

9. After Computer boots, Open Program and Features again and go to "Turn Windows features on or off

10. Now CHECK Highlighted item ON the way it is shown on image above.
11. If it will ask you to reboot, then reboot.
12. Now open browser and go to the http://www.homedj.net
13. Navigate to Download Server link and click it.
14. When prompted either to Run or Save HomeDJInstall.exe, click Run.
15. Follow installation wizard.

Hope it will finish successfully this time.

The following properties have been set:
Property: [AdminUser] = true {boolean}
Property: [InstallMode] = HomeSite {string}
Property: [ProcessorArchitecture] = AMD64 {string}
Property: [VersionNT] = 6.1.1 {version}
Running checks for package 'Windows Installer 4.5', phase BuildList
Looking up path for special folder 'WindowsFolder'
Running check with folder 'C:\Windows\System32' and file 'msi.dll'
Attempting to find file 'C:\Windows\System32\msi.dll'
File version is '5.0.7601.17807'
Setting value '5.0.7601.17807 {version}' for property 'VersionMsiDll'
The following properties have been set for package 'Windows Installer 4.5':
Property: [VersionMsiDll] = 5.0.7601.17807 {version}
Running checks for command 'WindowsInstaller4_5\WindowsXP-KB942288-v3-x86.exe'
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '4.5': true
Result of checks for command 'WindowsInstaller4_5\WindowsXP-KB942288-v3-x86.exe' is 'Bypass'
Running checks for command 'WindowsInstaller4_5\WindowsXP-KB958655-v2-x86-ENU.exe'
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsiDll' and value '4.5.6001.22299': true
Result of checks for command 'WindowsInstaller4_5\WindowsXP-KB958655-v2-x86-ENU.exe' is 'Bypass'
Running checks for command 'WindowsInstaller4_5\WindowsServer2003-KB942288-v4-x86.exe'
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '4.5': true
Result of checks for command 'WindowsInstaller4_5\WindowsServer2003-KB942288-v4-x86.exe' is 'Bypass'
Running checks for command 'WindowsInstaller4_5\WindowsServer2003-KB958655-v2-x86-ENU.exe'
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsiDll' and value '4.5.6001.22299': true
Result of checks for command 'WindowsInstaller4_5\WindowsServer2003-KB958655-v2-x86-ENU.exe' is 'Bypass'
Running checks for command 'WindowsInstaller4_5\WindowsServer2003-KB942288-v4-x64.exe'
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsi' and value '4.5': true
Result of checks for command 'WindowsInstaller4_5\WindowsServer2003-KB942288-v4-x64.exe' is 'Bypass'
Running checks for command 'WindowsInstaller4_5\WindowsServer2003.WindowsXP-KB958655-v2-x64-ENU.exe'
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsiDll' and value '4.5.6001.22299': true
Result of checks for command 'WindowsInstaller4_5\WindowsServer2003.WindowsXP-KB958655-v2-x64-ENU.exe' is 'Bypass'
Running checks for command 'WindowsInstaller4_5\Windows6.0-KB958655-v2-x86.MSU'
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsiDll' and value '4.5.6001.22308': true
Result of checks for command 'WindowsInstaller4_5\Windows6.0-KB958655-v2-x86.MSU' is 'Bypass'
Running checks for command 'WindowsInstaller4_5\Windows6.0-KB958655-v2-x64.MSU'
Result of running operator 'VersionGreaterThanOrEqualTo' on property 'VersionMsiDll' and value '4.5.6001.22308': true
Result of checks for command 'WindowsInstaller4_5\Windows6.0-KB958655-v2-x64.MSU' is 'Bypass'
'Windows Installer 4.5' RunCheck result: No Install Needed
Running checks for package 'Microsoft .NET Framework 4 (x86 and x64)', phase BuildList
Reading value 'Version' of registry key 'HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Full'
Unable to read registry value
Not setting value for property 'DotNet40Full_TargetVersion'
The following properties have been set for package 'Microsoft .NET Framework 4 (x86 and x64)':
Running checks for command 'DotNetFX40\dotNetFx40_Full_x86_x64.exe'
Result of running operator 'ValueEqualTo' on property 'InstallMode' and value 'HomeSite': true
Result of checks for command 'DotNetFX40\dotNetFx40_Full_x86_x64.exe' is 'Bypass'
Running checks for command 'DotNetFX40\dotNetFx40_Full_setup.exe'
Result of running operator 'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite': false
Skipping ByPassIf because Property 'DotNet40Full_TargetVersion' was not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
Result of running operator 'VersionLessThan' on property 'VersionNT' and value '5.1.2': false
Result of running operator 'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64': false
Result of checks for command 'DotNetFX40\dotNetFx40_Full_setup.exe' is 'Install'
'Microsoft .NET Framework 4 (x86 and x64)' RunCheck result: Install Needed
Running checks for package '.NET Framework 3.5 SP1', phase BuildList
Reading value 'SP' of registry key 'HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.5'
Read integer value 1
Setting value '1 {int}' for property 'DotNet35SP'
The following properties have been set for package '.NET Framework 3.5 SP1':
Property: [DotNet35SP] = 1 {int}
Running checks for command 'DotNetFX35SP1\dotNetFx35setup.exe'
Result of running operator 'ValueGreaterThanEqualTo' on property 'DotNet35SP' and value '1': true
Result of checks for command 'DotNetFX35SP1\dotNetFx35setup.exe' is 'Bypass'
'.NET Framework 3.5 SP1' RunCheck result: No Install Needed
EULA for components 'Microsoft .NET Framework 4 (x86 and x64)' was accepted.
Copying files to temporary directory "C:\Users\ADMINI~1\AppData\Local\Temp\VSDAD2F.tmp\"
Downloading files to "C:\Users\ADMINI~1\AppData\Local\Temp\VSDAD2F.tmp\"
(5/22/2014 7:55:05 PM) Downloading 'DotNetFX40\dotNetFx40_Full_setup.exe' from 'http://go.microsoft.com/fwlink/?linkid=182805' to 'C:\Users\ADMINI~1\AppData\Local\Temp\VSDAD2F.tmp\'
Download completed at 5/22/2014 7:55:06 PM
Verifying file integrity of C:\Users\ADMINI~1\AppData\Local\Temp\VSDAD2F.tmp\DotNetFX40\dotNetFx40_Full_setup.exe
WinVerifyTrust returned 0
File trusted
Running checks for package 'Microsoft .NET Framework 4 (x86 and x64)', phase BeforePackage
Reading value 'Version' of registry key 'HKLM\Software\Microsoft\NET Framework Setup\NDP\v4\Full'
Unable to read registry value
Not setting value for property 'DotNet40Full_TargetVersion'
The following properties have been set for package 'Microsoft .NET Framework 4 (x86 and x64)':
Running checks for command 'DotNetFX40\dotNetFx40_Full_setup.exe'
Result of running operator 'ValueNotEqualTo' on property 'InstallMode' and value 'HomeSite': false
Skipping ByPassIf because Property 'DotNet40Full_TargetVersion' was not defined
Result of running operator 'ValueEqualTo' on property 'AdminUser' and value 'false': false
Result of running operator 'VersionLessThan' on property 'VersionNT' and value '5.1.2': false
Result of running operator 'ValueEqualTo' on property 'ProcessorArchitecture' and value 'IA64': false
Result of checks for command 'DotNetFX40\dotNetFx40_Full_setup.exe' is 'Install'
'Microsoft .NET Framework 4 (x86 and x64)' RunCheck result: Install Needed
Verifying file integrity of C:\Users\ADMINI~1\AppData\Local\Temp\VSDAD2F.tmp\DotNetFX40\dotNetFx40_Full_setup.exe
WinVerifyTrust returned 0
File trusted
Installing using command 'C:\Users\ADMINI~1\AppData\Local\Temp\VSDAD2F.tmp\DotNetFX40\dotNetFx40_Full_setup.exe' and parameters ' /q /norestart /ChainingPackage FullX64Bootstrapper /lcid 1033'
Process exited with code 1603
Status of package 'Microsoft .NET Framework 4 (x86 and x64)' after install is 'InstallFailed'